Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • If you have a JTAG connector:

    • (Consider doing the slot 1 tests, below, before installing the core into slot 0.)

    • Flash the COR into slot 0. (See instructions below.)

    • Test the configuration utility.

      • Hold ALT while powering on.

      • Test RTC setting. See updated date formatting.

      • Test MAC address: press R to randomize.

    • Test the onboarding utility.

      • From configuration utility, Exit and Reboot to Onboarding.

      • Test RTC setting. See updated date formatting.

    • Test the core utility.

      • Hold NO SCROLL while powering on.

      • Try installing different cores in different slots.

      • Press HELP to get version information. (If HELP asks for a file, you have an old version of the flasher.)

      • Try to break it!

    • Press and hold random keys while powering on.

  • Install the COR into slot 1.

    • Copy the COR onto the SD card.

    • Hold NO SCROLL while powering on to enter the core installation/selection menu.

    • Press Ctrl + 1, then select mega65r3MEGA65R3.corCOR and follow prompts to install the COR in slot 1.

  • With the COR in slot 1:

    • Hold ALT while powering on to access Configuration. It should say v1.0, using the Configuration menu from the slot 1 core.

    • Hold ALT while powering on to access the SD Card utility. It should say v0.24, using the SD Card menu from the slot 1 core.

  • Prepare a fresh SD card using the sdcard-files provided in the release candidate download.

    • Linux and macOS: Use the copy-flash.sh script to install the files onto a previously-prepared SD card. (This copies the files with the recommended defragmentation technique.)

    • If you have a full-size SD card that you’re willing to fully erase:

      • Open the case and insert it into the internal SD card slot.

      • Use the SD Card utility (from the Alt boot menu) to prepare, erase, and install the system software in the internal slot.

      • Move the SD card to your PC and install all files from mega65-release-prep.

      • Eject it from your PC and reinsert it into the internal SD card slot.

      • This (plus the core in slot 0) is the complete launch configuration for batch #2.

  • Test all programs on the MEGA65.D81 disk.

  • Test GEOS65.D81 (included in mega65-release-prep).

  • Try the Turrican Engine Demo by Shallan.

  • Test other programs that you use, develop, or own.

...