Visual Guide to Flashing Slot 0 without JTAG

1. Copy the COR file from your PC to the SD card

In my example I use a freshly formatted SD card (formatted with MEGA65 Release 0.95 FDISK). From the archive I copy the *.cor file to the SD cards root directory. Note: this is using Release 0.96 Build #12, it might be a different version for you.

After the copy finished, unmount the SD card, so the files are really all written and then transfer the SD card to your MEGA65. In my example I used the external slot, the internal slot was empty.

Open

Image might differ depending on the OS you are using

2. Hold down NO SCROLL and power on your MEGA65

It is important to first hold down NO SCROLL and then power your MEGA65 on, while holding NO SCROLL. Release the key after MEGAFLASH shows up.

Open

You may use two hands!

The above images show the screens you get from your Release 0.95 factory core MEGAFLASH. Note that the “MEGAFLASH/Core hash” and the “Slot 0 Version” show the same hash (93d55f0, first 7 characters). This may be different if you have some other factory core.

3. Flash the release core file into slot 1

The next step is to flash the core we copied in step 1 into our core slot 1 using the old MEGAFLASH. You initiate this by pressing CTRL-1. In the file selector you choose the one core we put on the SD card (if you have more then one core, you need to pick the right one – if not sure, try to rename the core on the SD card to something 8.3 UPPERCASE).

Attention: Don’t restart yet, you need to stay in MEGAFLASH for step 4!

4. Start MEGAFLASH of the newly flashed core

Now we want to start the new MEGAFLASH that is within the core we just flashed to slot 1. To archive this we need a little trick and we need to be fast! While still in MEGAFLASH, we start slot 1 with a press of 1. But then we would be in BASIC65… not if we are fast! We need to press 1 and then directly hold down NO SCROLL!

5. Confirm that you are in the new MEGAFLASH

After this we should be greeted by the new MEGAFLASH! You can see that it is the new one because the left space is smaller (2 instead of 4 – see old pictures above) and you can again check HELP. You can find the hash of the core file you are using in the filename of the core and the release archive.

6. Start flashing slot 0

Now we can flash slot 0. But we can’t press Ctrl-0 to do that, we need to press MEGA-COMMA instead.

Then we will be greeted by a huge disclaimer. You need to read and C O N F I R M + RETURN it! After this you get the new “Edit Slot” screen.

7. Choose core file to flash

To flash slot 0 with the new core file, we need to first load a core. The menu tells us to press F3 to do that. From the file selector we choose our core (note that we now see the long filename, and after a short while we get some information about the core). Pressing RETURN selects the core.

8. Start flashing

As you can see from the menu, the next key we need to press is F8 to flash the core we just selected. The core file is first loaded into attic ram, and then the CRC32 checksum is calculated. If this succeeds, the progress turns green and flashing starts. Then first all sectors are erased that would hinder the start of slot 1 for recovery (if flashing is interrupted).

9. Done!

After flashing finished, we get a confirmation screen. Back in the menu you can check the Slot 0 Version hash by pressing HELP. You can now reboot your system.